PLC Simulator
All 143 components

building props · indicator model

Floor indicator

The floor indicator is a reusable 3D building props component for building props layouts. In this simulator it adds a reusable, correctly scaled object to a complete automation scene.

1 I/O points1 snap portsPLC-driven state
Isolated component viewPROP_FloorIndicator_ROOT

Motion and state

Its visible state changes with simulated I/O, making status and diagnosis readable in the scene.

PLC control pattern

Commission it by proving feedback before accepting floor number.

Fault practice

Inject stuck-on, stuck-off states and require the PLC sequence to detect, stop and recover deliberately.

Signal map

I/O you can reason about

PLC output Floor number

SignalPLC directionType / range
Floor number
floor
outputint

Fault and recovery exercise

Make abnormal states part of the sequence

Inject stuck-on, stuck-off states and require the PLC sequence to detect, stop and recover deliberately.

stuck-onstuck-off

Engineering boundary

The model teaches PLC sequence behaviour and diagnosis. Confirm ratings, wiring, guarding, process calculations and commissioning limits against the real manufacturer documentation and site design.