PLC Simulator
CCW and Micro800 learners

Connected Components Workbench Tutorial: Practice Micro800 Ladder Logic Free

Connected Components Workbench (CCW) is Rockwell Automation's software for Micro800 controllers, and its Standard Edition is a free download. This page shows how CCW contacts, coils, timers and counters map to graded labs you can run in a browser.

Independent practice site. Not Rockwell software, and it cannot open CCW project files. Vendor facts last checked 20 November 2026.

No signup for the first program. All 12 beginner labs are free with no card.

What Connected Components Workbench is

  • What it does: Rockwell describes CCW as the design software for its Micro Control System: controller programming and simulation, device configuration, and an HMI editor.
  • Controllers: the Micro800 family. Rockwell's instruction manual covers the Micro810, Micro820, Micro830, Micro850 and Micro870.
  • Languages: Ladder Diagram, Function Block Diagram and Structured Text.
  • Standard Edition: a free download that includes a demo version of the Micro800 Simulator. Rockwell sends you to its Product Compatibility and Download Center to get it.
  • Developer Edition: a paid annual subscription. It adds the full Micro800 Simulator, Archive Manager and more programming features. Rockwell does not show a price on the page.
  • Current version: Rockwell's page describes version 23.

CCW gives you an editor and Rockwell's own simulator. It does not grade your logic. Each lab on this site runs your rungs against a simulated machine and checks what the machine did, which is how you find out whether a start/stop circuit or a timer really works.

Watch: Allen-Bradley-style ladder in the browser

A short screen recording of the simulator this page links to. It shows Allen-Bradley-style rungs being written and run. It is not a recording of CCW.

Allen-Bradley PLC Simulator — Real Browser Demo

CCW instructions next to the dialects used here

The simulator has an Allen-Bradley-style dialect and an IEC 61131-3 dialect. Neither is CCW. The CCW column uses the names in Rockwell's Micro800 General Instructions manual.

Connected Components Workbench instruction names compared with the Allen-Bradley-style and IEC dialects in this simulator
What you want to doIn CCW (Micro800)Here, Allen-Bradley styleHere, IEC style
Pass power when a bit is onDirect ContactXICNormally open contact
Pass power when a bit is offReverse ContactXIONormally closed contact
Turn an output on while the rung is trueDirect CoilOTECoil
Latch a bit on, and release itSet Coil and Reset CoilOTL and OTUSET and RESET coils
Delay before something turns onTON function block: inputs IN and PT, outputs Q and ETTON. Done bit T1.DN, elapsed time T1.ACCTON: inputs IN and PT, outputs Q and ET
Count events up to a targetCTU function block: inputs CU, RESET and PV, outputs Q and CVCTU, with RES to reset itCTU: inputs CU, R and PV, outputs Q and CV
Name a piece of dataA Variable. Global Variables belong to the controller, Local Variables to one programA named tagA named variable

Where Micro800 differs from Logix, and from the labs here

  • Two sets of names. CCW's default theme uses IEC names such as Direct Contact. Its Logix theme shows Logix names and symbols for ladder instructions that work the same way. Rockwell's guide uses XIC, XIO, OTE and TON in its ladder text example, and says the full mapping is under Tools, Options, Theme, Instruction Mapping.
  • Timers and counters are IEC-style blocks. A Micro800 TON has a Q output and an ET elapsed time. A Logix 5000 TON uses a TIMER tag with .DN and .ACC members. So for timers and counters, the IEC dialect here is the closer match to CCW, even though the contact and coil names in the Logix theme match the Allen-Bradley-style dialect.
  • Variables, not tags. CCW calls a tag a Variable. A Global Variable is the equivalent of a controller tag, and a Local Variable belongs to one program. Rockwell's example rung uses built-in I/O variable names such as _IO_EM_DI_00 and _IO_EM_DO_06.
  • Not every Logix instruction exists. Rockwell's guide says NOP, SBR, INT, JSR and AFI are not supported when you paste a rung from Logix Designer.
  • Here: labs use named tags such as SWITCH and LIGHT. You do not practise Micro800 I/O variable names on this site.

CCW words and their Logix Designer equivalents

From Rockwell's CCW guide for Logix Designer users. Useful if a job posting or a course uses the other set of words.

Connected Components Workbench terms and the Studio 5000 Logix Designer equivalents
Connected Components WorkbenchStudio 5000 Logix Designer
VariableTag
Global VariableController Tag
BuildVerify and Assemble
Connect / DisconnectGo Online / Go Offline
DiscoverUpload and Go Online
LockForce
Run Mode Change (RMC)Online Editing
User-defined Function Blocks (UDFBs)Add-On Instructions (AOI)
User-defined Functions (UDFs)Subroutine
CCWARC fileACD file

Four practice tasks that carry over to CCW

Each task is a free beginner lab. The simulator grades the behavior, not the exact rungs, so any correct program passes.

  1. 1

    A Direct Contact driving a Direct Coil

    In CCW: one Direct Contact and one Direct Coil on a rung. In the Logix theme they show as XIC and OTE.

    Here: close the switch and the light must come on; open it and the light must go off.

    Beginner lab 1: Switch turns on Light →
  2. 2

    Set Coil and Reset Coil

    In CCW: a Set Coil on the start rung and a Reset Coil on the stop rung, both on the same variable.

    Here: a momentary start latches the output and a momentary stop releases it.

    Beginner lab 7: Latched Start/Stop (SET/RESET) →
  3. 3

    A TON block and its Q output

    In CCW: a TON function block with IN and PT, then a contact on its Q output.

    Here: the light must come on only after the switch has been held for 2 seconds. In the IEC dialect the block has the same IN, PT, Q and ET names.

    Beginner lab 8: Delayed-on light (TON) →
  4. 4

    A CTU block with a reset

    In CCW: a CTU function block with CU, RESET and PV, then a contact on its Q output.

    Here: five pulses must turn the lamp on, four must not, and the reset input must clear the count.

    Beginner lab 10: Count to five (CTU) →

Lab pages are public. Running a lab needs a free account; the first program at /try needs no account at all.

What does not transfer

You still need CCW itself, and Rockwell's manuals, for:

  • Project setup: choosing the controller catalog number and version, and adding plug-in and expansion I/O modules.
  • Going online: Connect, Discover, download, Run Mode Change and locking I/O.
  • Micro800 names: Global and Local Variables and the built-in I/O variable names.
  • Reusable code: user-defined functions and function blocks.
  • Devices around the controller: PanelView 800 screens and PowerFlex drive configuration.
  • Project files and hardware: this site cannot open, save or convert a CCW project, and it cannot connect to a controller.

A sensible order

Learn the logic here, then build it in CCW

  1. Run the first program with no signup, then work through the 12 free beginner labs.
  2. Download CCW Standard Edition from Rockwell and rebuild labs 1, 7, 8 and 10 as a Micro800 project.
  3. Test the project in Rockwell's Micro800 Simulator or on a Micro820 or Micro850.

The beginner labs are free with no card. Pro is $29 a month and adds the larger scenario library. Cancel anytime and keep access to the end of the period.

Questions

Connected Components Workbench: common questions.

The Standard Edition is. Rockwell lists Connected Components Workbench Standard Edition as a free download that includes a demo version of the Micro800 Simulator. The Developer Edition is a paid annual subscription that adds the full simulator and more programming features. We checked Rockwell's page on 20 November 2026.

Sources

All checked on 20 November 2026. Written by Paul.

  1. Rockwell Automation, Design and Configuration Software (Connected Components Workbench)What CCW is; Standard Edition is a free download with a demo version of the Micro800 Simulator; Developer Edition is an annual subscription with the full simulator; version 23 features; Logix theme; Windows requirements.
  2. Rockwell Automation, Product Compatibility and Download Center: Connected Components WorkbenchWhere Rockwell sends you to download the Standard Edition.
  3. Rockwell Automation, Connected Components Workbench Software Guide for Studio 5000 Logix Designer Application Users, publication 9328-QR001C-EN-E (July 2022)CCW terms next to Logix Designer terms (Variable and Tag, Global Variable and Controller Tag, Build, Connect, CCWARC and ACD); the Logix theme; ladder text input with XIC, XIO, OTE and TON; Logix instructions that are not supported.
  4. Rockwell Automation, Micro800 Programmable Controllers General Instructions, publication 2080-RM001M-EN-E (May 2025)Ladder element names (Direct Contact, Reverse Contact, Direct Coil, Set Coil, Reset Coil); TON and CTU parameters; supported languages; the controllers the instructions apply to.